Epson TM P60 Installation And Setup Guide

Epson TM-P60 Setup Guide | October 7, 2013| pg 1
1 OVERVIEW
The Epson TM-P60 is a wireless Windows printer that can be used with Squirrel Mobility or Squirrel
mPOS. The printer should be configured to use the customer’s existing wireless network, and will
connect to the Squirrel POS system using the Windows Printer Driver Support in Squirrel Printer Setup.
1.1 Required Files
There are two files that you will need in order to connect and configure the printer to work with the
Squirrel POS system.
These files are located here:
• https://pos.epson.com/developers/techresdetails.htm?productpk=492
You will need the following:
• Roadrunner V Network Configuration Tool (Downloads as the NetConfig.zip)
This is the configuration file that allows you to set up the wireless network and the network
address.
• Advanced Printer Driver (Downloads as the APD_454EWM.zip)
This is the Windows printer driver
Once you have downloaded these files you will need to follow the steps below.
2 CONFIGURING THE EPSON TM-P60 WIRELESS PRINTER
You will need the following:
• Epson TM-P60 printer
• Epson TM-P60 configuration cable
• Epson TM-P60 power supply
T
O CONFIGURE THE EPSON TM-P60 PRINTER, ROADRUNNER V NETWORK CONFIGURATION TOOL
(DOWNLOADS AS THE NETCONFIG.ZIP):
1. Ensure that the printer is powered off
2. Connect the TM-P60 to the configuration cable
3. Connect the configuration cable to the serial com port on the Squirrel Host PC

Epson TM P60 Specifications

General

Brand	Epson
Model	TM P60
Category	Printer
Language	English