Epson TM-P60II - Resetting the Printer to Factory Default; Initiate Factory Reset Procedure

9 | P a g e
Resetting the Printer to Factory Default
Before doing any configuration on the device we must first reset it back to factory defaults.
1. Press the button on the top right of the printer, to
release the paper roll cover.
2. Press and hold the FEED button and press the
POWER button, to power on the printer.
3. When the printer has powered on, press the FEED
button 6 times, then close the paper roll cover.
Note: When closing the paper cover, make sure the
paper is in between the guides so that it can be ejected
properly.