Part Names and Functions
Roll paper cover
Open this cover to install/replace the roll paper.
Manual cutter
Use this cutter when you cut the roll paper manually.
Cutter cover
Open this cover to unlock the autocutter blade when the roll paper cover does not open due to a
paper jam. (U
“Paper is jammed” on page 17)
Power switch
Use this switch to turn on or off the printer.
Cover open lever
Use this lever to open the roll paper cover.
Control panel
(Power) LED: This LED is on when the printer is on.
Error LED: This LED indicates an error. (U “Error LED is on” on page 17 or “Error LED is
flashing” on page 17
)
Paper LED: This LED is on when the paper is out. This LED flashes when the printer is in
standby.
Feed button: This button feeds paper.
To Next Page
Loading...
Need help?
General
