Need help?Do you have a question about the Epson TX800-12H and is the answer not in the manual?
General| Brand | Epson |
|---|---|
| Model | TX800-12H |
| Category | Printer Accessories |
| Language | English |
Overview of the W801TOA3 VA mainboard.
Visual details and layout of the W801TOA3 VA mainboard.
Explanation of the interfaces on the W801TOA3 VA mainboard.
Important notes and considerations for the W801TOA3 VA mainboard.
Details about the W803HDON VA spray plate.
Specific information regarding the W803HDON VA spray plate.
Information on the W802HEND VA XP600 gusset plate.
Description of the external touch panel options.
Procedures for initializing the system startup.
Using the USB3.0 tool for startup initialization configuration.
Step-by-step guide for using the USB boot action tool.
Order of ink colors for the print head.
Adjusting color alignment for print heads.
List of supported print resolutions and PASS counts.
Overview of the main interface of the software.
Procedures for debugging software operations.
Steps to calibrate the gear ratio for motors.
How to use the cleaning functions within the software.
Checking the operational status of the print head.
Procedure for calibrating the vertical alignment of the print head.
Calibrating the step accuracy of the print head movement.
Adjusting bidirectional printing alignment.
How to load print files into the software.
Overview of various software functionalities.
Explanation of the main menu bar options.
Details on the print control interface elements.
Accessing and configuring various software parameters.
Accessing and using the maintenance functions.
Performing bias calibration for print heads.
Configuring motor movement and speed settings.
Adjusting voltage settings for print heads.
Configuring fundamental system settings.
Navigating the system menu options.
Information displayed by the system.
Troubleshooting steps when the device does not start.
Resolving issues with X-Moto moving only in one direction.
Troubleshooting when the software is not connected to the board.
Addressing the issue of the cartridge moving left post-connection.
Troubleshooting when the print head does not flash.
Resolving problems with printing the status diagram.
Troubleshooting when head status information is not displayed.
Issues related to the spray pattern of the head status.
Troubleshooting problems with drawing wires.
Guidance on creating depth and whiteness test pictures.
Resolving issues with 1PASS data reading and micro-injection settings.
To Next Page
