Need help?Do you have a question about the Epson VS400 and is the answer not in the manual?
General| Number of colors | 16.78 million colors |
|---|---|
| Projection distance | 0.76 - 7.62 m |
| Projection technology | LCD |
| Contrast ratio (typical) | 2000:1 |
| Screen size compatibility | 30 - 300 \ |
| Projector native resolution | XGA (1024x768) |
| Keystone correction, vertical | ±30 ° |
| Mounting | front / rear |
| Aspect ratio | 16:10 |
| RS-232 ports | 1 |
| Dimensions (WxDxH) | 358 x 257 x 95 mm |
| Horizontal resolution | 560 lines |
| Lamp type | UHE |
| Lamp power | 230 W |
| Light source type | Lamp |
| Service life of light source | 2500 h |
| Service life of light source (economic mode) | 3500 h |
| DVI port | No |
| Audio (L/R) in | - |
| Serial interface type | RS-232 |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet LAN (RJ-45) ports | 0 |
| Analog signal format system | NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM |
| Supported graphics resolutions | 1024 x 768 (XGA), 1152 x 864 (XGA+), 1400 x 1050 (SXGA+), 1440 x 900 (WXGA+), 1600 x 1200 (UXGA), 1680 x 1050 (WSXGA+), 640 x 480 (VGA), 800 x 600 (SVGA) |
| Placement | Ceiling |
| Product color | White |
| Cable lock slot type | Kensington |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 0.2 W |
| Power consumption (typical) | 317 W |
| Noise level | 37 dB |
| Noise level (economic mode) | 29 dB |
| Operating temperature (T-T) | 5 - 35 °C |
Weight and Dimensions| Weight | 3550 g |
|---|
Details the key features and capabilities of the VS400 projector.
Lists available accessories and replacement parts with their part numbers.
Guides users to resources like the help system and website for further assistance.
Details the buttons and indicators on the projector's built-in control panel.
Identifies and explains the functions of each button on the projector's remote control.
Provides guidelines for positioning the projector for optimal display and ventilation.
Offers tables to determine projector placement distance based on desired image size.
Explains how to connect various computer and video sources to the projector.
Detailed steps for powering on the projector and connected devices.
Guides users on how to adjust the focus ring for a sharp image.
Explains how to switch between different connected video or computer sources.
Details how to select different color modes for optimal image viewing.
Overview of security options like password protection and button locks.
Explains different password security features like Power On Protect and User's Logo Protect.
Adjusting image parameters like brightness, contrast, and color.
Configuring settings related to different input video signals.
How to reset projector settings to default values or reset the lamp timer.
Instructions for safely cleaning the projector lens to ensure image clarity.
Procedures for cleaning or replacing the air filter and vents for proper cooling.
Information on when and how to replace the projector lamp.
Interpreting the status lights on the control panel to diagnose problems.
Troubleshooting specific issues related to the projected image quality and appearance.
Guidance for resolving "No Signal" errors, including laptop display settings.
Troubleshooting issues related to the projector's and remote control's operation.
Key technical details of the projector, including resolution, brightness, and size.
Lists compatible display formats, refresh rates, and resolutions.
Crucial safety warnings regarding projector use, handling, and servicing.
Essential safety guidelines for setting up and operating the projector.
Regulatory compliance information for the projector in the US and Canada.
To Next Page
