
Do you have a question about the Epson VS350 and is the answer not in the manual?
| Matrix type | 3-panel (p-Si TFT active) |
|---|---|
| Number of colors | 1.073 billion colors |
| Native aspect ratio | 4:3 |
| Projection distance | - m |
| Projection technology | 3LCD |
| Contrast ratio (typical) | 15000:1 |
| Screen size compatibility | 30 - 300 \ |
| Projector native resolution | XGA (1024x768) |
| Keystone correction, vertical | -30 - 30 ° |
| Focus | Manual |
| Throw ratio | 1.48 - 1.77:1 |
| Optical zoom | 1.2 x |
| Zoom capability | Yes |
| Focal length range | 16.9 - 20.28 mm |
| Aperture range (F-F) | 1.49 - 1.72 |
| DVI port | No |
| HDMI connector type | Full-size |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Component video (YPbPr/YCbCr) in | 0 |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | - W |
| Power consumption (typical) | 295 W |
| Power consumption (economy mode) | 211 W |
| Noise level | 37 dB |
| Projection modes | Ceiling, Front, Rear |
| Noise level (economic mode) | 28 dB |
| Cables included | AC, VGA |
| Sustainability certificates | RoHS |
| Operating temperature (T-T) | 5 - 35 °C |
| Analog signal format system | NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM |
| Supported graphics resolutions | 800 x 600 (SVGA), 1024 x 768 (XGA), 1152 x 864 (XGA+), 1280 x 1024 (SXGA), 1280 x 960, 1400 x 1050 (SXGA+), 1440 x 900 (WXGA+) |
| Lamp type | UHE |
| Lamp power | 210 W |
| Lamps quantity | 1 lamp(s) |
| Light source type | Lamp |
| Service life of light source | 6000 h |
| Service life of light source (economic mode) | 10000 h |
| Placement | Desktop, Ceiling |
| Product type | Standard throw projector |
| Product color | White |
| RMS rated power | 1 W |
| Depth | 233.6 mm |
|---|---|
| Width | 302 mm |
| Height | 81.2 mm |
| Weight | 2494 g |
Instructions for connecting computers via USB, VGA, and HDMI.
Steps for connecting video devices like HDMI, component, and composite.
Step-by-step guide to powering on the projector.
Adjusting visual parameters like brightness, contrast, and color.
Information on replacing the projector lamp and resetting the timer.
Solutions for issues related to projected images and audio.
Crucial safety warnings and precautions for projector use.
Detailed safety guidelines for setup, operation, and maintenance.