Why can't I monitor my Epson Software projector in standby mode?
To monitor and control the Epson projector using EasyMP Monitor when it's in standby mode, ensure the projector's Standby Mode is set to Communication On (or Network On), or that Network Monitoring is set to On within the configuration menu.
What to do if an e-mail message is not sent when a problem occurs with an Epson Software projector?
If you are not receiving email notifications when there's an issue with your Epson projector, verify that the SMTP server IP address, Port Number, and Recipient mail address have all been entered correctly in the settings.
How to fix Epson Software projectors that cannot be monitored or controlled?
If the Epson projector cannot be monitored or controlled, check the following: 1. Ensure the network cable is correctly connected; reconnect if necessary. 2. Verify the Network configuration settings. 3. Reinstall EasyMP Monitor. 4. Register the projectors you intend to monitor or control.
Why is my Epson Software projector not sending e-mail alerts after a critical error?
If your Epson projector has momentarily stopped working due to a critical problem, it won't be able to send email messages. If the projector cannot be reset after checking, contact Epson.
General| Matrix type | 3-panel (p-Si TFT active) |
|---|---|
| Number of colors | 1.073 billion colors |
| Native aspect ratio | 4:3 |
| Projection distance | 0.75 - 8.89 m |
| Projection technology | 3LCD |
| Contrast ratio (typical) | 10000:1 |
| Screen size compatibility | 30 - 350 \ |
| Projection distance (tele) | 8.89 - 8.89 m |
| Projection distance (wide) | 0.75 - 0.75 m |
| Projector native resolution | SVGA (800x600) |
| Keystone correction, vertical | -30 - 30 ° |
| Focus | Manual |
| Throw ratio | 1.45 - 1.96:1 |
| Focal length range | 16.77 - 16.77 mm |
| Aperture range (F-F) | 1.44 - 1.44 |
| Lamp type | UHE |
| Lamp power | 200 W |
| Lamps quantity | 1 lamp(s) |
| Light source type | Lamp |
| Service life of light source | 5000 h |
| Service life of light source (economic mode) | 6000 h |
| Full HD | No |
| HD-Ready | Yes |
| Video processing | 10 bit |
| Analog signal format system | NTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM |
| Supported graphics resolutions | 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 800 (WXGA), 1400 x 1050 (SXGA+), 1440 x 900 (WXGA+), 640 x 480 (VGA) |
| USB 2.0 ports quantity | 2 |
| Component video (YPbPr/YCbCr) in | 0 |
| HDCP | - |
| Noise level | 37 dB |
| Noise level (economic mode) | 29 dB |
| RMS rated power | 2 W |
| Placement | Desktop, Ceiling |
| Product type | Large venue projector |
| Product color | Black, White |
| Cable lock slot type | Kensington |
| Power source | AC |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | - W |
| Power consumption (typical) | 283 W |
| Power consumption (economy mode) | 207 W |
| Operating temperature (T-T) | 5 - 35 °C |
Weight and Dimensions| Depth | 228.6 mm |
|---|---|
| Width | 294.64 mm |
| Height | 76.2 mm |
| Weight | 2313.32 g |
Details the key features and capabilities of the projector.
Lists all items included in the projector packaging.
Details optional items that may be needed for specific connections.
Information on purchasing extra accessories and replacement parts.
Covers warranty details and product registration procedures.
Explains symbols and text conventions used throughout the manual.
Provides resources for further help and support.
Identifies components on the front and top of the projector.
Identifies components on the rear of the projector.
Identifies components on the base of the projector.
Details the buttons and indicators on the projector's control panel.
Identifies all buttons and functions on the remote control.
Guidance on how to position the projector for optimal viewing.
Information on optimal distances for various screen sizes.
Instructions for connecting various input sources to the projector.
Step-by-step guide to powering on the projector.
Instructions on how to properly shut down the projector.
How to adjust the projected image for a rectangular display.
Details on using the remote control for projector functions.
How to switch between different connected input sources.
Adjusting the projector's color settings for optimal display.
How to use the zoom function to enlarge or reduce the projected image.
Overview of security options to protect the projector.
Instructions for setting up password protection for the projector.
Guide to navigating and interacting with the projector's menu system.
Adjusting image parameters like color, brightness, and sharpness.
Configuring how the projector processes input signals.
Customizing various projector features and operational settings.
Advanced setup options for projector operation and display.
Configuring network connectivity and monitoring settings.
Settings for power saving and optimizing lamp life.
Viewing current operational status and system information.
How to restore projector settings to factory defaults.
General guidelines for keeping the projector in good condition.
Instructions for cleaning the projector's lens.
Procedures for cleaning and maintaining air filters and vents.
Information regarding projector lamp replacement and timer reset.
Steps for replacing batteries in the remote control.
Guidelines for safely moving or shipping the projector.
Basic troubleshooting steps for common projector issues.
Interpreting projector indicator lights for problem diagnosis.
Solutions for issues related to projected images or audio output.
Troubleshooting issues with projector or remote control operation.
Resolving issues related to projector network connectivity.
Contact information and resources for technical support.
Overall technical details and capabilities of the projector.
Lists compatible video formats, resolutions, and refresh rates.
System requirements for using the projector's USB Display software.
Critical warnings regarding projector use and handling.
Detailed safety precautions for setup and operation.
Information regarding the licenses of included open source software.
Formal statement regarding copyright and publication rights.
To Next Page
