Epson VS400 - Connecting to Video Sources

2. Connect the USB cable to your projector's USB TypeB port.
3. Connect the other end to any available USB port on your computer.
4. If necessary, configure your computer to work with an external USB mouse. See your computer
documentation for details.
Parent topic: Connecting to Computer Sources
Related references
Projector Setup Settings - Extended Menu
Connecting to Video Sources
Follow the instructions in these sections to connect video devices to the projector.
Connecting to a Component-to-VGA Video Source
Connecting to an RGB VGA Video Source
Connecting to an S-Video Video Source
Connecting to a Composite Video Source
26