Epson WF-C869R Series - Setting up Epson Open Platform; Activating Epson Open Platform

2. Setting Up Epson Open Platform
You need to update and activate the rmware for the MFD to congure Epson Open Platform.
Activating Epson Open Platform
You can activate Epson Open Platform from Web Cong on the MFD.
1. Use one of the following methods to connect the MFD to the system administrator’s computer.
Connect by wired or wireless LAN
Connect directly using a LAN cable
If you want to connect using a wired connection or wireless LAN, connect to the network in the same segment
as the setup computer.
2. Turn on the MFD.
3. On a computer, open your web browser, and then open the MFD’s Web Cong by entering "http://<epson-
device-IP>".
4. Select Epson Open Platform Settings > Product key.
5. Select the version of Epson Open Platform you want to set from Epson Open Platform Version.
Usable functions and panel display images may dier because compatible Epson Open Platform vary
depending on the authentication system. Contact your sales company or local dealer for more details.
6. Open the CSV le that contains the license issued for Epson Open Platform, and then copy the product key
that is paired with the serial number.
Hardware Setup Guide
2. Setting Up Epson Open Platform
10