5. Select Setup Wizard.
Note: If you need to disable the wireless network to set up your product on an Ethernet network,
press the arrow buttons and select Disable Wireless LAN instead. Then follow the instructions on
the Start Here sheet to set up your product on a wired network and install the necessary software
from the product CD. The installer program guides you through network setup.
6. Select the name of your wireless network or enter the name manually.
Note: To enter the wireless network name manually, press the arrow buttons and then select Other
SSIDs. Use the displayed keypad to enter your network name, as described in the next step.
23
To Next Page
Loading...
