Epson WorkForce 845 User Manual

Cleaning the Paper Path
If you see ink on the back of a printout, you can clean the paper path to remove any excess ink.
1. Load a few sheets of plain paper in the product.
2. Use the product control panel to make a copy, but without placing a document on the scanner glass.
3. Check the back of the ejected paper to see if it is clean.
4. Repeat as necessary until the paper comes out clean.
Parent topic: Adjusting Print Quality
Related topics
Copying
257

Epson WorkForce 845 Specifications

Print Specifications

Maximum Print Resolution	5760 x 1440 optimized dpi
ISO Print Speed Black	15 ISO ppm
ISO Print Speed Color	9.3 ISO ppm
Two-Sided ISO Print Speed Black	7.4 ISO ppm
Two-Sided ISO Print Speed Color	5.4 ISO ppm

Copy Specifications

Maximum Copy Size	8.5" x 14"
ISO Copy Speed Black	13 ISO cpm
ISO Copy Speed Color	7.1 ISO cpm

Scan Specifications

Optical Resolution	2400 dpi
Hardware Resolution	2400 x 2400 dpi
Maximum Resolution	9600 x 9600 dpi

Fax Specifications

Modem Speed	33.6 Kbps
Memory Capacity	Up to 180 pages
Speed Dials	60 (max.)

Connectivity

Hi-Speed USB	Supported
Wireless Connectivity	802.11 b/g/n
Wired Ethernet	10/100 Mbps

Paper Handling

Maximum Paper Size	8.5" x 44"
Input Paper Capacity	500 sheets plain paper
Automatic Document Feeder Capacity	30 sheets

General Specifications

Operating Temperature Range	50 ° to 95 °F (10 ° to 35 °C)
Storage Temperature Range	-4 ° to 104 °F (-20 ° to 40 °C)
Sound Level	38 dB(A)

Power Specifications

Rated Voltage	100 – 120 VAC
Rated Frequency	50 – 60 Hz
Rated Current	0.6 Amp

Weight and Dimensions

Printing Dimensions (W x D x H)	17.6" x 22.3" x 12.3"
Storage Dimensions (W x D x H)	17.6" x 14.5" x 11.8"
Weight	22.0 lb