Epson XP-600 - Changing the Sleep Timer Setting from the Control Panel

You see this screen:
5. Press the up or down arrow buttons to select the length of time after which you want the product to
automatically turn off when it is not in use. Then press OK.
6. Press the home button to exit.
Parent topic: The Power Off and Sleep Timers
Changing the Sleep Timer Setting from the Control Panel
You can use the product's control panel to change the time period before the product enters sleep mode.
1. Press the home button, if necessary.
2. Press the left or right arrow buttons, select Setup, and then press OK.
3. Press the down arrow button, select Printer Setup, and then press OK.
You see this screen:
22