248
9. Check the printed pattern to see if there are gaps in the lines.
Print head is clean
Print head needs cleaning
10. Do one of the following:
• If there are no gaps, select O.
• If there are gaps or the pattern is faint, select X and continue with the next step.
11. Follow the instructions on the screen to clean the print head, check the nozzles, and repeat the
process if necessary.
Caution: Never turn off the product or open the front cover during a cleaning cycle or you may not
be able to print.
If you don’t see any improvement after cleaning the print head up to 3 times, wait at least 6 hours without
printing. Then run the nozzle check again and clean the print head again if necessary. If quality still does
not improve, contact Epson.
Parent topic: Print Head Cleaning
Related tasks
Checking the Nozzles Using the Product Control Panel
Cleaning the Print Head Using a Computer Utility
To Next Page
Loading...
