Epson XP-620 - Using WPS to Connect to a Network; Printing a Network Status Sheet

Using WPS to Connect to a Network
If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to
connect your product to the network.
1. On the product, press the home button, if necessary.
2. Press the arrow buttons to select Wi-Fi Setup and press the OK button.
3. Select Push Button Setup (WPS) and press the OK button.
4. Follow the instructions on the LCD screen to complete WPS setup.
Your product should now be connected to the network.
Parent topic: Wi-Fi Protected Setup (WPS)
Printing a Network Status Sheet
You can print a network status sheet to help you determine the causes of any problems you may have
using your product on a network.
1. Press the home button, if necessary.
2. Press the arrow buttons to select Setup and press the OK button.
3. Select Network Settings and press the OK button.
39