Equinox Systems Shard - CA 8 Remote Control Operation; CA 8 Controller Interface; Blackout Functionality; Mode Selection via CA 8

www.prolight.co.uk Shard User Manual
9
CA 8 function:
TheunithasaCA8remotecontrolinputontherear.ThismaybeusedwiththeCA8handcontroller
(soldseparately)tocontroltheunit.Pleaseseefunctionsbelow.
Blackout-BypressingtheStandBybuttonthexturewillblackout.
Mode-Usethisbuttontoputthextureintostrobe,autoorshowmodes.
Strobemode(LEDoff)
Automode(LEDon)
Showmodes(LEDashing)
Function-Onceyouhavechosenthemodeyourequireusethisbuttontosetthestrobeprogram/auto
modespeedorshowmodes.
Strobemode-1.Synchronousstrobe
  2.Twolightstrobe
  3.Strobeviasound
Automode-Rotationspeed(1-9)
Showmodes-Shows1-8
Operating instructions