To Next PageTo Next PageWhat to do if my EQUIPRITE Jacks will lift, but not maintain pressure?
If your EQUIPRITE jack lifts, but fails to maintain pressure, it might be due to the release valve not being tightly closed. Ensure the release valve is securely closed. Alternatively, a hydraulic unit malfunction could be the cause. In this case, stop using the jack and contact your local Fastenal Representative or visit www.fastenal.com to locate your nearest store.
Why does my EQUIPRITE 5100790 have poor lift performance?
If your EQUIPRITE Jacks exhibit poor lift performance, it could be due to a low fluid level. Ensure the fluid level is at the correct level. Another possible cause is air trapped in the system. To resolve this, with the ram fully retracted, remove the oil filler plug to let any pressurized air escape, then reinstall the oil filler plug.
Why EQUIPRITE Jacks will not lift load?
If your EQUIPRITE jack will not lift a load, it could be because the release valve isn't tightly closed; make sure it is. It might also be that the load is too heavy. If this is the case, consider using a jack with a higher capacity.
How to fix EQUIPRITE 5100790 that will not lift to full extension?
If your EQUIPRITE Jacks won't lift to its full extension, the fluid level might be low. Make sure the fluid level is at the correct level.
What to do if EQUIPRITE 5100790 Jacks will not lower after unloading?
If your EQUIPRITE jack does not lower after unloading, one potential cause is an overfilled reservoir. To fix this, drain the fluid to the proper level. Another cause could be binding linkages. In this case, clean and lubricate the moving parts.
Overview and purpose of the Insta-Lift Service Jack.
Technical details including model, capacity, and dimensions.
Instructions for assembling the jack handle.
Essential checks and familiarization before operating the jack.
Procedure to remove air from the hydraulic system.
Step-by-step guide for safely lifting a load with the jack.
Procedure for safely lowering a load.
Instructions for checking and replenishing hydraulic jack oil.
Procedure for periodic replacement of hydraulic fluid.
Identifies common jack problems and their corrective actions.
General