ERBA GmbH
A-1230 Wien
Talpagasse 6
Servicehotline: Tel: +43(0) 1 930 10 - 160 · Fax: +43(0) 1 930 10 - 960 · E-Mail: service@erba.at
Instruction manual
17004 / 17015
Issue: 01/2017
Changes, print, punctuation and other errors reserved!
Page 19
GB - INSTRUCTION MANUAL
2. PRODUCT DESCRIPTION
The compressor is used to generate compressed air to operate air powered tools. Any other use is
prohbited. The buyer accepts all liabilities, legal and otherwise, for any damage or injury resulting
from improper use of the product (i.e. any other use than the above stated designated use).
3. DESIGNATED USE
Please note, that this product is not designed for commercial or industrial use. We accept no liability
or warranty claims should the product be used in industrial and/or commercial operations.
4. RESTRICTIONS
5. TECHNICAL DATA
Rated power:
Engine power:
Engine rpm:
Working pressure:
Tank volume (17004/17015):
Air consumption:
Sound power level LwA:
Sound pressure level LpA:
IP Class:
Weight (17004/17015):
230 V ~ 50 Hz
2 PS/1500 W
2850 rpm
max. 8 bar
24 / 50 l
210 l/min.
93 dB (A) ± 3 dB
71 dB (A) ± 3 dB
IP 20
25,7 / 33,5 kg
See technical data.
6. NOISE EMISSION VALUES
1. Air intake filter
2. Pressure tank
3. Wheel
4. Oil gauge
5. Safety valve
6. Pressure regulator
7. Working pressure valve
8. Gauge (working pressure)
9. Pressure switch
10. Handle
11. On/off switch
12. Oil plug
13. Gauge (tank pressure)
14. Oil release screw
15. Tank pressure valve
16. Stand
17. Drain valve
18. Overload switch
To Next Page
Loading...