16
EBP28
Getting Started . . .
Technical specications / Before you start
The sound values have been determined according to noise test code given in
EN 15503, using the basic standards EN ISO 3744 and EN ISO 11201.
Wear ear protection, especially when sound pressure is over 70 dB(A).
The declared vibration value has been measured in accordance with a standard test
method (according to EN 15503) and may be used for comparing one machine with
another. The declared vibration value may also be used to evaluate the exposure for
the user caused by vibration in advance.
WARNING! Depending on the actual use of the machine the vibration values
can differ from the declared total. Adopt proper measures to protect yourself
against vibration exposures. Take the whole work process including times
the machine is running under no load or switched off into consideration!
Proper measures include among others regular maintenance and care of
the machine and accessories, keeping hands warm, periodical breaks and
proper planning of work processes!
Unpacking
1. Unpack all parts and lay them on a at, stable surface.
2. Remove all packing materials and protective shipping materials, if applicable.
3. Make sure the delivery contents are complete and free of any damage. If you nd
that parts are missing or show damage do not use the machine and contact your
dealer. Using an incomplete or damaged machine represents a hazard to operators
and property.
4. Ensure that you have all the accessories and tools needed for assembly and
operation. This also includes suitable personal protective equipment.
WARNING! The machine and the packaging are not children’s toys! Children
must not play with plastic bags, sheets and small parts! There is a danger of
choking and suffocation!
To Next Page
Loading...