31
EBP28
In more detail . . .
> Assemble the S-shaped tube (17) and the nozzle (18/ 19) properly to the blower
outlet (1) as described in chapter “Blower assembly”.
> Hold the nozzle (18/ 19) approximately 10 cm above the ground.
> Use a sweeping motion from side to side and walk slowly forward (Fig. 14).
14
After use
1. Stop the engine, disconnect the spark plug connector (6). Let the engine come to a
complete stop and wait until it cools down.
2. Check, clean and store the machine as described in section “The golden rules
for care”.
The golden rules for care
WARNING! Always stop the engine, disconnect the spark plug connector and
let the machine cool before performing inspection, maintenance and cleaning
work.
DANGER! Proper maintenance is essential for safe and trouble free operation.
Improper maintenance, or failure to address a problem instantly can cause a
malfunction which can result in serious injury or even death.
> Keep the machine clean and clear blockages in the S-shaped tube (17) and
nozzles (18, 19).
> Regular and proper cleaning helps to ensure safe operation and prolongs the life
of the machine.
Operation / Care and maintenance
To Next Page
Loading...