33
EBP28
In more detail . . .
Care and maintenance
Air lter
Inspect the air lter regularly. Clean or replace it with a new one if necessary.
1. Loosen the xing nut on the cover of the air lter case (9) to remove the cover
(Fig. 15).
15
9
Air lter
Fixing nut
2. Remove the air lter and tap it on a stable surface to remove dust. Use compressed
air (max. 3 bar) to remove stubborn dust.
3. Apply a small amount of air lter oil on the air lter to obtain an optimal performance.
Wring out surplus oil and put the air lter into the case.
4. Ret the air lter. Ret the cover and secure it with the xing nut.
Fuel, fuel lines and fuel lter
The fuel tank of this machine is tted with a lter located at the free end of the fuel pipe.
If it is necessary to clean or replace the fuel lter, contact an authorised service centre
or a similarly qualied person.
> Keep fuel fresh (less than 30 days) or add fuel stabiliser.
> Empty the fuel tank after every use.
> Run the machine dry of fuel in idle before storage.
> Replace fuel lines and fuel lters every 2 years.