11
f. Do
not expose a battery pack or tool to re or excessive
temperature. Exposure to re or temperature above 130 °C
may cause explosion.
g. Fo
llow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specied in the instructions. Charging improperly or at
temperatures outside the specied range may damage the
battery and increase the risk of re.
SERVICE
a. Ha
ve your power tool serviced by a qualied repair person
using only identical replacement parts. This will ensure that
the safety of the power tool is maintained.
b. N
ever service damaged battery packs. Service of battery
packs should only be performed by the manufacturer or
authorized service providers.
ADDITIONAL SAFETY WARNINGS FOR YOUR COMBI DRILL
a. Wear ear protectors when use impact drilling. E
xposure to noise
can cause hearing loss.
b. Use auxiliary handle(s), if supplied with the tool.
Loss of control
can cause personal injury.
c. Brace the tool properly before use.
This tool produces a high
output torque and without properly bracing the tool during
operation, loss of control may occur resulting in personal injury.
d. Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory/fastener
may contact hidden wiring.
Cutting accessory/fastener
contacting a “live” wire may make exposed metal parts of the
power tool “live” and could give the operator an electric shock.
e.
Always check walls, oors and ceilings for hidden power cables
and pipes.
To Next Page
Loading...
