Need help?Do you have a question about the Erbauer ERI603COM and is the answer not in the manual?
Details exclusions like wear and tear, misuse, lack of maintenance, accidental damage, and cosmetic damage.
Keep area clean and lit, avoid explosive atmospheres, and keep children away.
Match plugs, avoid earthed surfaces, don't expose to rain, protect cord from damage.
Stay alert, use PPE, prevent unintentional starting, remove keys before operation.
Do not force tool, use correct tool, maintain tools, keep cutting tools sharp.
Wear ear protection for impact drilling; use auxiliary handle; hold by insulated surfaces.
Remove battery before adjustments; do not expose to rain; store battery at correct temperatures.
Charger is double insulated, for indoor use only, requires supervision, handle leaking battery liquid carefully.
If electrolyte leaks, wash skin with water; for eye contact, rinse with water and seek medical help.
Silica and wood dust can cause lung cancer, silicosis, COPD, and asthma with regular exposure.
Always use approved safety equipment like dust masks and dust extraction facilities.
Dust from some jobs contains chemicals causing cancer, birth defects, or reproductive harm.
Work in ventilated areas and use approved safety equipment such as dust masks.
Directive aims to reduce hand-arm vibration syndrome by providing test results.
Adopt correct working practices, use sharp tools, and maintain the tool properly.
Tool may cause HAVS if not managed; identify and implement safety measures.
Memorise safety directions, stay alert, and switch off/disconnect upon malfunction.
Product generates an electromagnetic field that may affect medical implants.
Use the supplied charger; battery is protected against deep discharge; allow to cool before charging.
Steps for plugging in the charger, inserting the battery, and interpreting indicator lights.
Explains light signals: Red on (Charging), Red flash (Defective Battery), Green on (Fully Charged), Green flash (Hot/Cold Delay).
Always allow the chuck to stop completely before changing direction or gear speed to prevent damage.
Recycle battery pack properly; cover terminals with tape to prevent short circuit before disposal.
Check if the forward/reverse rotation control is in the lock position.
Verify torque position; adjust ring to higher position for more torque.
Never connect live/neutral to earth terminal; use approved 5AMP BS1363/A plug and correct fuse.
To Next Page
General
