21
BATTERY PACK POWER BAR
The Li-Ion battery pack (6) is equipped with a POWER BAR which is used to give an
indication of the battery pack’s remaining charge. Press the POWER BAR button (7) to
check battery charge as below. The LED will stay lit for approximately 5 seconds
.
7
76-100% Charge
51-75% Charge
26-50% Charge
5-25% Charge
under 5% Charge
Flash On Off
HOW TO USE THE BELT CLIP (B1, B2)
Screw the Belt clip (10) on the tool with the screw. The Belt clip can be hooked on your belt
or pocket, etc.
AUXILIARY HANDLE (C)
Fix the auxiliary handle onto the hammer drill before working. To clamp the auxiliary
handle, rotate the handle clockwise. To loosen the auxiliary handle, rotate the handle
anti-clockwise.
WARNING!
This tool generates high levels of torque. Never operate the
product without the auxiliary handle to avoid accidents and injury! Always
ensure that the auxiliary handle is attached and secured correctly before
operation! The auxiliary handle provides better control of the product in case
of sudden jams during use when considerable forces are released!
To Next Page
Loading...
