17
ECSP41
Getting Started . . .
Assembly
WARNING! The product must be fully assembled before operation!
Do not use a product that is only partly assembled or assembled with damaged
parts!
Follow the assembly instructions step-by-step and use the pictures provided
as a visual guide to assemble the product easily!
Disconnect the spark plug connector before assembly! Reconnect it after
assembly (see "Maintenance").
CAUTION: Risk of cuts!
The teeth of the saw chain are very sharp! Protective gloves must be worn for
all work on the saw chain.
NOTE: Take care of small parts that are removed during assembly or when
making adjustments. Keep them secure to avoid loss. Complete the assembly
on a at and stable surface.
Installing the guide bar and saw chain
WARNING! Always use a saw chain designed as “low-kickback” or a saw chain
which meets the low-kickback requirements! A standard saw chain (a chain
which does not have the kickback reducing guard links) should only be used by
an experienced professional operator! Nevertheless, a low-kickback saw chain
does not completely eliminated kickback! A low-kickback or “safety” chain should
never be regarded as complete protection against injury! Therefore always use
a low-kickback saw chain in conjunction with other kickback protection devices
such as the front hand guard!
Before you start
To Next Page
Loading...
