Erbauer ECSP41 - Care and maintenance

46
ECSP41
In more detail . . .
The golden rules for care
WARNING! Always stop the engine, disconnect the spark plug connector and let
the product cool before performing inspection, maintenance and cleaning work.
DANGER! Proper maintenance is essential for safe and trouble free operation.
Improper maintenance, or failure to address a problem instantly can cause a
malfunction which can result in serious injury or even death.
1. Keep the product clean. Remove debris after each use and before storage.
2. Regular and proper cleaning helps to ensure safe operation and prolongs the life
of the product.
3. Inspect the product before each use for worn and damaged parts. Do not operate
it if you nd broken and worn parts. Replace worn parts as necessary or contact an
authorised service centre for repair before using the product again.
WARNING! Only perform repairs and maintenance work according to these
instructions! All further works must be performed by a qualied specialist!
Maintenance table
Inspect and maintain this product regularly based on below maintenance table. Keep
the chain saw in good working condition during maintenance.
Part Task Before/after
each use
Every 10 hours
of operation
Every 25 hours
of operation
Overall
check X
clean X
Cylinder
ns
clean X
Spark plug
check X
clean X
replace whenever necessary
Care and maintenance