48
ECSP41
In more detail . . .
Cleaning
NOTE: Do not use chemical, alkaline, abrasive or other aggressive detergents
or disinfectants to clean this product as they might be harmful to its surfaces.
Cleaning the housing
> Use a damp, lint-free cloth to clean the housing of the product.
> Do not emerge the product into water or any liquids.
>
Clean the ventilation slots at the side cover of the engine with a soft brush. Clogged
ventilation slots might cause the engine to overheat.
> Wipe the surface with a dry cloth afterwards.
Cleaning the saw chain
> Use a soft plastic brush to clean the saw chain (3) from dirt.
>
Use a resin solvent (not provided) to clean the saw chain. Read the resin solvent
manufacturer’s instructions before proceeding.
>
To protect the saw chain from rust and oxidation, lubricate it with a special saw chain
oil (not provided).
Cleaning the guide bar
> Disassemble the guide bar (2) and saw chain in reversed order from assembly.
>
Remove any dirt accumulated inside the guide bar slot using a plastic putty knife
(not provided) (Fig. 38).
38
> Use a damp, lint-free cloth to clean the surface.
> Wipe the surface with a dry cloth afterwards.
Care and maintenance
To Next Page
Loading...
