54
ECSP41
In more detail . . .
Spark plug
NOTE: For good performance, the spark plug must be properly gapped and
free of deposits.
Inspect the spark plug every 25 hours or before long-term storage over 180 days. Clean
or replace with a new one if necessary (type: BPMR7A).
1. Pull the locking lever on the top cover and remove the top cover (6).
2. Push the red tab forward to loosen and remove the air lter (6b).
3. Disconnect the spark plug connector (6a) (Fig. 47).
4.
Loosen the spark plug anti-clockwise using the multi-tool (24) and remove it carefully.
6a
47
Spark plug
Care and maintenance
To Next Page
Loading...
