Erbauer ECSP41 - Page 56

56
ECSP41
In more detail . . .
28
49
14
Idle speed screw
WARNING! Adjusting the screws L and H must be performed by an authorised
service centre or a similarly qualied person. Using a single D screwdriver
(not provided) turn the screws L and H to adjust the quantity of fuel in relation
to the air.
Silencer
If it be necessary to modify or replace the silencer, contact an authorised service centre
or a similarly qualied person.
Spare parts/Replacement parts
The following parts of this product may be replaced by the consumer. Spare parts are
available at an authorised dealer or through our customer service.
Description Model no. or Specication
Guide bar (2) OREGON® 164BXNA041
Saw chain (3) OREGON® 80TXL64X
Spark plug BPMR7A
(Gap of electrodes: 0.7 mm) or other model
with same specications
Care and maintenance