Erbauer ECSP51 - Page 56

56
ECSP51
In more detail . . .
28
50
Chain catcher
Replace a damaged or worn chain catcher (17) with a new one of the same type.
1. Loosen the bolt of the chain catcher (17) and remove it.
2. Fix a new chain catcher to the product.
Silencer
If it be necessary to modify or replace the silencer, contact an authorised service centre
or a similarly qualied person.
Spare parts/Replacement parts
The following parts of this product may be replaced by the consumer. Spare parts are
available at an authorised dealer or through our customer service.
Description Model no. or Specication
Guide bar (2) OREGON® 200TXLBK095
Saw chain (3) OREGON® 95TXL078
Spark plug BPMR7A
(Gap of electrodes: 0.7 mm) or other model
with same specications
Care and maintenance