Erbauer ELM18-Li - Battery Management and Safety Key; Battery Tool Use and Care

11
10
BATTERY TOOL USE AND CARE
a.
Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type of battery
pack may create a risk of re when used with another battery
pack.
b. U
se power tools only with specically designated battery
packs. Use of any other battery packs may create a risk of
injury and re.
c. When
battery pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails, screws
or other small metal objects, that can make a connection
from one terminal to another. Shorting the battery terminals
together may cause burns or a re.
d. Unde
r abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs,
ush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause
irritation or burns.
e. Do
not use battery pack or tool that is damaged or modied.
Damaged or modied batteries may exhibit unpredictable
behaviour resulting in re, explosion or risk of injury.
f.
Do not expose a battery pack or tool to re or excessive
temperature. Exposure to re or temperature above 130 °C
may cause explosion.
g.
Follow all charging instructions and do not charge
the battery pack or tool outside the temperature range
specied in the instructions. Charging improperly or at
temperatures outside the specied range may damage the
battery and increase the risk of re.
VIBRATION AND NOISE REDUCTION
To reduce the impact of noise and vibration emission, limit the time
of operation, use low-vibration and low-noise operating modes as
well as wear personal protective equipment.
Take the following points into account to minimize the vibration and
noise exposure risks:
a. Only use the product as intended by its design and these
instructions.
b. Ensure that the product is in good condition and well
maintained.
c. Use correct cutting attachments for the product and ensure
they in good condition.
d. Keep tight grip on the handles/grip surface.
e. Maintain this product in accordance with these instructions and
keep it well lubricated (where appropriate).
f. Plan your work schedule to spread any high vibration tool use
across a longer period of time.
EMERGENCY
Familiarise yourself with the use of this product by means of
this instruction manual. Memorise the safety directions and
follow them to the letter. This will help to prevent risks and
hazards.
a. Always be alert when using this product, so that you can
recognise and handle risks early. Fast intervention can prevent
serious injury and damage to property.
b. Switch off and disconnect from the power supply if there
are malfunctions. Have the garden power tool checked by a
qualied professional and repaired, if necessary, before you
operate it again.