POWER SUPPLY CONNECTION
The pressure washer is factory-equipped with an electrical cord. This cord
should only be connected to an electrical outlet installed in accordance with
local safety regulations.
A. Connect only to a properly earthed outlet.
ALWAYS use RCD adaptor with this product.
B. Inspect cord before using. Do not use if cord is damaged.
C. Keep all connections dry and off the ground.
D. Do not touch plug with wet hands.
E. If replacement of the plug or cord is needed, use only identical replacement
parts. Contact Supplier for proper replacement parts.
Extension cords are not recommended.
POWER SUPPLY CONNECTION
!!
WARNING
To Next Page
Loading...
