CAUTION: Do not damage the screen while removing or cleaning.
Any foreign particles entering the pump may cause damage.
COOLING SYSTEM
The air vents, located in and around the pressure washer, must be kept clean
and free of any obstructions to ensure proper air cooling of the motor during
operation.
WARNING: Prevent water from penetrating the vents of the pressure
washer to minimise the risk of damage to the machine and to reduce
the risk of electric shock to the operator.
MOVING AND STORAGE INSTRUCTIONS
CAUTION: Always store your pressure washer in a location where
the temperature will not fall below 0℃（32°F）. The pump in this
machine is susceptible to permanent damage if frozen.
DAMAGE CAUSED BY FREEEZING IS NOT COVERED BY THE
WARRANTY.
If you must store your pressure washer in a location where the temperature
is below 0℃（32°F）, you can minimise the chance of damage to your machine
by utilizing the following procedure:
1. Stop the pressure washer
2. Squeeze the trigger of the discharge gun to drain all water from the wand
and hose.
3. Detach supply hose and high-pressure hose.
4. Restart the pressure washer and let it run briefly (about 5 seconds) until
water no longer discharges from the high pressure outlet.
CAUTION:
WARNING:
CAUTION:
COOLING SYSTEM
MOVING AND STORAGE INSTRUCTIONS
!!
CAUTION
!!
WARNING
!!
CAUTION
Never spray water directly onto the pressure washer for cleaning.
C
C
To Next Page
Loading...