OO
II
WARNING: WARNING: If the wand is not securely locked into place,it could be
ejected under high pressure when operating the gun, possibly
causing injury or damage.
squeeze trigger on the spray gun.
then
7.
8. Press the on/off button to start pressure washer(Fig.5).
!!
WARNING
HIGH-PRESSURE/LOW-PRESSURE
(Fig.6,7).
CAUTION:Do not adjust the nozzle while the trigger is squeezed.
The high-pressure nozzle position is intended for cleaning. When high-pressure
is required,grasp collar and slide the collar and nozzle toward the gun.
NOTE: Make sure the collar is pulled to the extreme rear position(towards
the gun) to lock the nozzle in the high-pressure position.
HIGH-PRESSURE/LOW-PRESSURE
CAUTION:
NOTE:
!!
CAUTION
(Fig.6)
Fig.5
Fig.6
Now put on your safety goggles,
To Next Page
Loading...