1500W WALL CHASER
the correct ampere rating for your power tool and is in a safe
electrical condition.
9. Ensure your mains supply voltage is the same as indicated
on the rating plate.
10. Your tool is double insulated for additional protection against
a possible electrical insulation failure within the tool.
power cables and pipes.
12. After long working period, external metal parts and
accessories could be hot.
13. Only withdraw the blade from the cut when the blade has
been stopped moving.
material being cut to reduce saw vibration, blade jumping
and blade breakage.
15. Before cutting, check the cutting line is free of nails, screws,
etc.
prevent movement.
17. Never stop the cutting blade by applying side pressure to the
blade.
Warning: Some dust particles created by power sawing, contain chemicals
known to cause cancer, birth defects or other reproductive harm.
•
•
•
• Work in a well-ventilated area.
•
To Next Page
Loading...
