OPERATION
NOTE: Before using the tool, read the
instruction book carefully.
1. FITTING CUTTING DISCS (See Fig. 1-11)
Warning: Please make sure the blade is
diamond cutting disc which can cut
concrete, masonry and paving.
Always turn off and unplug the tool before
cap (See Fig.1).
the spindle lock button (See Fig. 2), then take out
the distance washers (See Fig.
cutting disc and distance washers onto the spindle.
Place the other cutting disc on the washer. (See Fig.
press in the spindle lock button (See Fig.
See
Fig.
Flange
cap
lock
knob
Outer flange
Fig. 1
Fig. 2
Fig. 3
Fig. 4
To Next Page
Loading...
