Fig. 9
Fig. 12
Fig. 11
Fig. 10
2. ADJUSTING CHANNEL WIDTH
width. The thickness of these washers is about
the spanner (See Fig. 2), take out the distance
width (See Fig.
clockwise fully.
3. ADJUSTING CHANNEL DEPTH
See Fig. 10) and
(See Fig. 11).
Set the cutting depth as the scale provided and
tighten the knob clockwise to lock.
4. INSTALLING THE AUXILIARY HANDLE (See
Fig. 12)
until it is secured fully.
Note:
To Next Page
Loading...
