j) Wear personal protective equipment. Depending on
application, use face shield, safety goggles or safety glasses.
As appropriate, wear dust mask, hearing protectors, gloves
and shop apron capable of stopping small abrasive or
workpiece fragments.
cause hearing loss.
k) Keep bystanders a safe distance away from work area.
Anyone entering the work area must wear personal protective
equipment.
l) Hold the power tool by insulated gripping surfaces only,
when performing an operation where the cutting accessory
may contact hidden wiring or its own cord. Cutting accessory
m) Position the cord clear of the spinning accessory. If you
n) Never lay the power tool down until the accessory has come
to a complete stop.
and pull the power tool out of your control.
o) Do not run the power tool while carrying it at your side.
Accidental contact with the spinning accessory could snag your
clothing, pulling the accessory into your body.
p) Regularly clean the power tool’s air vents.
r) Do not use accessories that require liquid coolants. Using
Kickback and related warnings
Kickback is a sudden reaction to a pinched or snagged rotating
wheel. Pinching or snagging causes rapid stalling of the rotating
To Next Page
Loading...
