17
To save the time settings press the button again. If you don’t press it again and don’t
press any other button for 10 seconds, the procedure is interrupted and the changes you
have made are discarded.
NOTE:
The unit default setting is 24 hour clock format.
SETTING THE VOLUME (E)
To increase the volume, rotate the On/Off/Volume knob clockwise. To reduce it, turn
the knob to the left.
Briey press the
button to mute the sound. Briey press the button again or
rotate the On/Off/Volume knob
to unmute the sound.
TONE ADJUSTMENT (F)
The low frequency (bass) boost can be turned on or off:
Briey press the BASS button. When the bass boost function is on, the Bass symbol
lights up.
SELECTING THE OPERATING MODE (G)
Briey press the MODE button for selecting the operating mode until the desired mode is
displayed.
The following operating modes are available:
- DAB Radio reception
- FM Radio reception
- Playback of music sources connected via Bluetooth
®
- Playback of music sources connected via AUX cable
The selection is shown by means of the corresponding symbol on the top of the display
BLUETOOTH® OPERATING MODE (H)
Activate the Bluetooth
®
operating mode with the MODE button or press the Bluetooth
®
button
. Activate the Bluetooth
®
function on the device to be connected (smartphone
or similar) and select “ERBAUER ERD18-Li” as the target of the Bluetooth
®
connection.
For this purpose, follow the instructions in the operating manual of the paired device
(smartphone or similar).
Press the
or button to change to previous or next song.
Press
button to pause or play.