18
NOTICE:
To disconnect (forget) the Bluetooth® device after successful
pairing, press the
button and hold for 2 seconds. The paired device is
disconnected.
When in Bluetooth
®
operating mode, the unit will turn off automatically after
1 hour of inactivity.
AUX IN OPERATING MODE (J)
Select the AUX IN operating mode using the MODE button.
Open the dust-proof cover (12) and connect the external music source (MP3 player or
similar) to the AUX input port (10) of the unit using the included AUX cable. Switch on the
external music source and start the playback.
Set the volume with the regulator for the external music source or the volume knob of the
unit.
NOTE:
Batteries of the connected devices cannot be charged via the
AUX input port.
When the unit is switched off, the connected devices are not switched off.
After using AUX input port, replace the dust-proof cover to protect the port
against dust, dirt or moisture.
CHARGING EXTERNAL DEVICES VIA THE USB PORT (K)
Open the dust-proof cover (12), insert the USB plug of the device to be charged into the
USB output port (9) of the unit.
The USB output port is a connection port for powering low power devices such as mobile
phones, MP3 players, etc.
Immediately disconnect the USB device after charging.
NOTE:
No music playback available via USB connection.
After using the USB output port, replace the dust-proof cover to protect the
port against dust, dirt or moisture.
DAB OPERATION MODE
TUNING (DAB)
When the device is rst switched on in DAB mode, the radio will auto scan to nd
broadcast
stations in the local area.
Briey press the MODE button or the
Button to stop auto scanning.
Briey Press the
or button to scroll through the stations.
To Next Page
Loading...