18V MULTI TOOL ERI616HTL
may cause burns or a re.
d) Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally occurs,
ush with water. If liquid contacts eyes,
additionally seek
medical help. Liquid ejected from the battery may cause irritation or
burns.
6) Service
a) Have your power tool serviced by a qualied repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
SAFETY INSTRUCTION FOR CUTTING
1. Hold power tool by insulated gripping surfaces, when performing
an operation where the cutting accessory may contact hidden
wiring. Cutting accessory contacting a “live” wire may make
exposed metal parts of the power tool “live” and could give the
operator an electric shock.
2. Always wear a dust mask.
ADDITIONAL SAFETY INSTRUCTIONS FOR YOUR BATTERY
CHARGER
1. This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
2. If the charger supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualied persons
in order to avoid a hazard.
3. Before charging, read the instructions.
4. After charging, disconnect the battery charger from the supply
mains. Then remove the chassis connection and then the
battery connection.
To Next Page
Loading...
