Need help?Do you have a question about the Erbe ERBOTOM ICC 350 and is the answer not in the manual?
General| Brand | Erbe |
|---|---|
| Model | ERBOTOM ICC 350 |
| Category | Medical Equipment |
| Language | English |
Describes the unit's purpose and application range.
Provides instructions on how to effectively use this manual.
Explains the meaning of safety symbols and warnings.
Emphasizes careful reading of the manual before initial use.
Outlines key procedures for safe first-time operation.
Details risks of unintended heat application to tissue.
Explains tissue damage risks from HF leakage currents.
Covers causes and prevention of accidental HF generator activation.
Discusses tissue damage from incorrect HF current usage.
Highlights dangers from improper neutral electrode placement.
Covers hazards associated with non-compliant or faulty accessories.
Addresses hazards from careless handling and unit output errors.
Warns about ignition risks with flammable materials.
Details burn risks from electrodes and electric shock hazards.
Discusses stimulation risks and pacemaker interactions.
Addresses explosion risks and potential interference with other equipment.
Provides a general introduction to the unit's capabilities.
Details automatic voltage and arc control cutting modes.
Explains power limitation, PPS, and cutting mode options.
Describes Endo Cut, Soft, Forced, Spray, and Bipolar coagulation.
Explains activation via footswitch/Auto Start and front panel programmability.
Describes the power switch and main function field areas.
Explains settings and activation for the Auto Cut function field.
Explains settings and activation for the Auto Coag 1 function field.
Explains settings and activation for the Auto Coag 2 function field.
Explains settings and activation for the Auto Bipolar function field.
Details the unit's 11 memory locations for settings.
Describes settings and parameters for bipolar cutting/coagulation.
Details settings and parameters for the Endo Cut mode.
Describes connections for neutral electrodes and CUT/COAG function fields.
Details AUTO BIPOLAR socket, footswitch connections, and safety field.
Covers potential equalization, volume, power, and fuses.
Explains the function of LF and HF leakage current monitors.
Describes monitoring for unit output errors and activation time limits.
Provides instructions for adapting the maximum time limit per mode.
Details the Neutral Electrode Safety System and error protection.
Explains the Neurotest device's purpose and its connections.
Details the Neurotest device's operation and underlying principles.
Explains the Neurotest device's purpose and its connections for ICC 350 T.
Details the Neurotest device's operation and principles for ICC 350 T.
Describes intended use with MIC/MIN instruments and air connection.
Details operation of MIC instruments and initial installation.
Explains automatic instrument recognition and configuration.
Details MIN instrument operation and associated technical data.
Describes the M-DOKU's purpose and PC/system setup.
Covers software setup and main menu function key usage.
Lists technical data for AUTO CUT and HIGH CUT modes.
Provides technical specifications for bipolar cutting and Program 'b'.
Lists technical data for ENDO CUT, Soft, Forced, and Spray coagulation.
Details AUTO BIPOLAR specs, safety features, and programmability.
Covers power connection, EC classification, and environmental conditions.
Summarizes unit status signals and their interpretations.
Illustrates voltage vs. power for AUTO CUT and BIPOLAR CUT modes.
Illustrates voltage vs. power for HIGH CUT mode.
Illustrates voltage vs. power for Soft Coagulation and Auto Bipolar.
Illustrates voltage vs. power for Forced Coagulation.
Illustrates voltage vs. power for Spray Coagulation.
Shows power output vs. load resistance for CUT modes.
Shows power output vs. load resistance for Soft Coag/Auto Bipolar.
Shows power output vs. load resistance for Forced Coagulation.
Shows power output vs. load resistance for Spray Coagulation.
Shows power output vs. load resistance for Bipolar Cut.
Illustrates power output versus power limitation for Auto Cut.
Illustrates power output versus power limitation for High Cut.
Shows power output versus limitation for Soft Coag/Auto Bipolar.
Shows power output versus limitation for Forced Coagulation.
Shows power output versus limitation for Spray Coagulation.
Explains NESSY warning signals based on resistance and HF current.
Covers spatial needs, grounding, and safe power connection.
Addresses explosion hazards and general setup procedures.
Details protection against moisture, cooling, interference, and unit inspection.
Explains how to adapt maximum time limits for operation modes.
Step-by-step guide for adjusting maximum time limits.
Details Forced Coagulation versions and neutral electrode switching modes.
Provides guidelines for cleaning and disinfecting the unit safely.
Details automatic checks performed on startup and during activation.
Describes how errors are recorded, signaled, and retrieved.
Lists error codes and provides recommended actions for resolution.
Lists the required safety checks for the ICC unit and their frequency.
Covers routine maintenance, safe repairs, and unit care practices.
Provides instructions on how to properly dispose of the unit.
Information on how to contact ERBE for service and inquiries.
Details the conditions, duration, and scope of the product guarantee.
To Next Page
