Need help?Do you have a question about the Erbe VIO 3 and is the answer not in the manual?
General| Device Type | Electrosurgical Generator |
|---|---|
| Connectivity | USB, Ethernet |
| Manufacturer | Erbe Elektromedizin GmbH |
| Argon Plasma Coagulation | Yes |
| Model | VIO 3 |
| Voltage | 100-240 V |
| Frequency | 350 kHz |
| Display | Touchscreen |
| Technology | Electrosurgery |
| Modes | Cut, Coagulation |
| Footswitch | Optional |
| Power Supply | Mains |
Details precautions to prevent electric shock hazards during operation.
Lists advanced settings accessible only to service personnel via password.
Lists error codes and troubleshooting steps for APC/APC-A errors.
Details error codes and troubleshooting for EIP/EIP-A related issues.
Provides troubleshooting for G/G-A errors related to the UGM module.
Lists I/I-A error codes and their corresponding corrective actions.
Covers error codes and solutions for the IES smoke evacuator.
Details M/M-A error codes and troubleshooting steps for the MCM module.
Lists N/N-A error codes and troubleshooting for the NM module.
Provides troubleshooting for P/P-A errors related to the PSU module.
Lists S/S-A error codes and troubleshooting for the SCM module.
Details U/U-A error codes and their respective actions.
Covers W-/W-A error codes and troubleshooting steps for the GWM module.
Provides a detailed procedure for conducting a technical safety check.
Covers the procedures for verifying electrical safety compliance.
Details the test for return electrode monitoring and resistance.
Tests the asymmetry monitoring for neutral electrodes.
Describes testing procedures for HF peak voltage in sinusoidal modes.
Details testing procedures for CUT bipolar output power.
Procedure for testing autoCUT bipolar function.
Procedure for testing forcedCOAG bipolar function.
To Next Page
