Need help?Do you have a question about the Erbe VIO 200 S and is the answer not in the manual?
Ensures safe operation by detailing proper grounding, outlet usage, and power cord handling.
Step-by-step guide to navigate and enter the Setup and Service levels, including password entry for Service.
Provides detailed guidance for resolving specific error codes (e.g., A/E, B, C, D, Err, F, 2,3,5,6, 4(NE), 9) with diagnostic steps.
Step-by-step guide for conducting technical safety checks, including required equipment and safety warnings.
Procedures for ensuring electrical safety through leakage current, grounding, and DC resistance tests.
Verifies unit performance via power output, activation modes, and specialized function tests.
Ensures safe operation by detailing proper grounding, outlet usage, and power cord handling.
Step-by-step guide to navigate and enter the Setup and Service levels, including password entry for Service.
Provides detailed guidance for resolving specific error codes (e.g., A/E, B, C, D, Err, F, 2,3,5,6, 4(NE), 9) with diagnostic steps.
Step-by-step guide for conducting technical safety checks, including required equipment and safety warnings.
Procedures for ensuring electrical safety through leakage current, grounding, and DC resistance tests.
Verifies unit performance via power output, activation modes, and specialized function tests.
General| Type | Electrosurgical Unit |
|---|---|
| Brand | Erbe |
| Model | VIO 200 S |
| Output Power | 200 W |
| Frequency | 350 kHz |
| Mains Frequency | 50/60 Hz |
| Modes | Cut, Coagulate, Blend |
| Mains Voltage | 100-240 V |
To Next Page
