Need help?Do you have a question about the Erbe VIO 50 C and is the answer not in the manual?
General| Type | Electrosurgical Unit |
|---|---|
| Brand | Erbe |
| Model | VIO 50 C |
| Frequency | 350 kHz |
| Modes | CUT, COAG |
| Output Power | 50 W |
Provides guidelines to prevent electric shock during operation and maintenance.
Describes service programs for basic servicing and diagnostic tests.
Warning that only trained personnel should perform repairs.
Lists error codes, their descriptions, and recommended actions.
Specifies that only trained personnel should perform service.
Defines a technical safety check as a preventive measure for device safety.
Provides a detailed procedure for performing a technical safety check.
Lists recommended Erbe test and measuring equipment for servicing.
Details specific tests like ground leakage and patient leakage current.
Details tests for power switch, acknowledgement tones, display, and LEDs.
Procedure for testing HF power output for CUT modes.
Procedure for testing HF power output for COAGULATE modes.
To Next Page
