Erbe VIO 50 - User Manual

To Next Page

80113-101_V25087 2023-11

USER MANUAL

VIO

50/100 C

V 1.0.x

ELECTROSURGERY

Main Page

Table of Contents5
General Instructions for Use9
Intended Use / Indications for Use9
Compatibility9
Intended Patient Population9
Contraindications9
Side Effects9
Environment9
Qualification of User10
Performance Characteristics10
Safety Instructions11
Safety Notations11
Meaning of the Note11
Who Must Read this User Manual11
Compliance with Safety Information12
Structure of Safety Instructions12
Operating Errors and Incorrect Installation by Persons Without Training12
Risks Due to the Environment13
Caused by Other Equipment14
Electric Shock15
Fire / Explosion16
Burns18
Risk of Infection23
Inadvertent Tissue Damage24
Stimulation of Nerves and Muscles24
Risks Due to Incorrect Use of the Neutral Electrode24
Defective Unit26
Damage to the Unit and Accessories26
Notes27
Safety Features29
Neutral Electrode Monitoring29
Automatic Monitoring of Equipment Output Error29
Automatic Monitoring of the on Time30
Protection from Operating Errors30
Accessories33
Introduction33
VIO 50 C/VIO 100 C - Example Accessories34
Compatible Instruments35
Check Compatibility of Instrument and CUT / COAG Mode35
Compatible Neutral Electrodes38
Compatible Footswitches38
Compatible Power Cords39
Description of the Controls41
Controls on the Front Panel41
Controls on the Back43
Working with the Electrosurgical Unit45
Re this Chapter45
Setting Options for the Unit46
Factory Unit Settings47
Checking the Unit and Accessories49
Connect Footswitch49
Connect Unit and Switch on50
Select/Switch Program50
Connect Monopolar/Bipolar Instruments50
Connect Neutral Electrode51
Check Program Settings54
Using the Unit (Cutting/Coagulation)56
Change Program Settings59
Save Program Settings61
Change Setup Settings (Signal Volume, Display Brightness)62
Change Service Settings63
Behavior When an Error Message Appears64
Description of Socket Hardware65
Sockets for Different Modes and Instrument Connectors65
Bipolar Socket65
Monopolar Socket66
Socket for Neutral Electrode66
Monopolar Modes69
Auto Cut69
Dry Cut72
Soft Coag75
Forced Coag78
Bipolar Modes81
Bipolar (= Bipolar Soft Coag)81
Installation85
Safety Instructions85
Installing the Unit on a Systemcarrier Compact87
Set up and Install Unit87
Cleaning and Disinfection89
Safety Instructions89
Selecting a Suitable Cleaning and Disinfection Agent90
Supplies90
Cleaning91
Disinfection91
Validated Procedure for Cleaning and Disinfection91
Error Messages93
Operating Error Messages93
System Error Messages94
General Technical Data95
Notes on Electromagnetic Compatibility (EMC)97
Guidelines for Avoiding, Recognizing and Rectifying Unwanted Electromagnetic97
System97
Maintenance, Customer Service, Warranty, Disposal103
Maintenance103
Customer Service103
Warranty104
Disposal104
Symbols105

Need help?

Do you have a question about the Erbe VIO 50 and is the answer not in the manual?

Erbe VIO 50 Specifications

General

Brand	Erbe
Model	VIO 50
Category	Medical Equipment
Language	English

Related product manuals

Erbe VIO 50 - User Manual

Table of Contents

Erbe VIO 50 Specifications

Related product manuals