6 • Working with the electrosurgical unit
64 / 106
80113-101_V25087
2023-11
Behavior when an error message appears
The VIO 50 C/VIO 100 C can identify various operating and system errors during op-
eration. An error number is assigned to each error that appears on the display when
the error occurs.
Fig. 6-13
A description of the messages and any action required can be found at the back of this
User Manual on page
93.
In the event of a message being shown on the display proceed as follows:
1. Use the table on page 93 to check whether you can resolve or prevent the error.
2. If the error cannot be corrected by action described in this User Manual and/or
recurs, Erbe Service should be informed.
To Next Page
Loading...
