Need help?Do you have a question about the Erbe ICC 300 H-E and is the answer not in the manual?
General| Brand | Erbe |
|---|---|
| Model | ICC 300 H-E |
| Category | Medical Equipment |
| Language | English |
Procedure for entering and navigating the test program menu.
Configuration of initial device settings before test programs.
Factory settings for the ICC 200 front panel displays.
Factory settings for the ICC 300 front panel displays.
Factory settings for the ICC 350 front panel displays.
Allows setting and storing of front panel configurations as basic settings.
Displays and manages the unit's error history and memory.
Verifies the functionality of D-flipflop circuit memories.
Checks all optical displays and 7-segment displays on the front panel.
Tests and sets all available sounds and their frequencies.
Actuates all relays to verify their functionality.
Allows setting of different NESSY versions for specific electrode types.
Displays the software version and option identification numbers.
Activates display programs to show measurement values.
Allows modification of the maximum time limit for unit operations.
Measures and displays internal voltages, temperature, and analog channels.
Sets the FORCED voltage versions for coagulation.
Monitors low-frequency leakage current for cardiac floating designation.
Lists recommended measuring equipment and details jumper configurations.
Adjusts the brightness of the 7-segment displays in 10 stages.
Modifies delay time specifications for AUTO START activation.
To Next Page
