1TEST PROGRAMS AND ADJUSTMENTS37 / 266
Art. No.: 80116-201
09 / 2004
Display program no. 15:
NESSY transition resistance in stand-by-operation and on activation.
Display for ICC 350 and ICC 300:
AUTO CUT AUTO COAG 1 AUTO COAG 2 AUTO BIPOLAR
rtr P2P3br
rtr calculated NESSY transition resistance [Ohm]
P2 set power for AUTO COAG 1 [W]
P3 set power for AUTO COAG 2 [W]
br AUTO START monitor
Display program no. 15:
NESSY transition resistance in stand-by-operation and on activation.
Display for ICC 200:
AUTO CUT AUTO COAG
rtr r
rtr calculated NESSY transition resistance [Ohm]
r AUTO START monitor
Display program no. 15
To Next Page
