Erbe VIO 3 - From Version 1.2.X; From Version 1.3.X

2 • Modifications
10 / 84
80116-938_V24392  2023-03
From Version 1.2.x
Hardware
Software
From version 1.3.x
Hardware
Software
Component affected Description of the modification
New VIO 3 system integration module Various components were altered and/or added for the integra-
tion of the VIO 3 in OP systems (altered housing cover, altered
EPAC base, two new circuit boards).
The design modification has repercussions for spare parts order-
ing and means the VIO 3 and (if connected) APC 3 software must
be updated to V
1.2.x.
Component affected Description of the modification
Service menu New setting “System Integration”: entry point for configuring the
VIO
3 for integration in OP systems.
Menu screen New display “System Integration Module”: displays a total of
three statuses of the integration of the VIO
3 in an OP system; for
a detailed explanation, see VIO
3 user manual.
ERROR list List of U/U-A errors expanded
New detecting module GWM, displayed on the unit as “W”.
Detects errors with the system integration of the VIO
3.
Component affected Description of the modification
New UGM From software version 1.3.1 a new Universal Generator Module is
installed. The design modification has an impact on the spare
parts order.
Component affected Description of the modification
ERROR list List of M/M-A errors expanded