Need help?Do you have a question about the Erbe APC 2 and is the answer not in the manual?
General| Brand | Erbe |
|---|---|
| Model | APC 2 |
| Category | Medical Equipment |
| Language | English |
Defines different safety alert types (WARNING, CAUTION, ATTENTION, IMPORTANT).
Emphasizes the need for User Manual knowledge for service activities.
Provides warnings about electric shock hazards and necessary precautions.
Safety instructions for handling argon pressure cylinders during servicing.
Precautions for handling electrostatically sensitive components during repair.
States conditions that void liability and warranty rights.
Details the front panel controls for APC 2 version 1.2.x.
Details the front panel controls for APC 2 versions from 1.3.x onwards.
Describes the controls located on the rear panel of the APC 2 unit.
Details the low voltage, HF, and potential equalization connections for the APC 2.
Lists specifications for the argon gas used, including purity, density, color, and odor.
Provides technical data related to gas input, discharge pressure, flow, and purging.
Specifies the physical dimensions and weight of the APC 2 unit.
Outlines temperature and humidity requirements for transport and storage.
Outlines temperature and humidity requirements for unit operation.
Provides instructions on acclimatizing the unit after temperature exposure.
Lists applicable standards and classifications for the APC 2.
Presents a block diagram illustrating the APC 2 system architecture and components.
Details the pneumatic system and its components for the APC 2.
Explains the function and operation of the APC controller and its power supply.
Describes the Instrument Interface assembly and its role in data communication.
Explains how the system recognizes activation signals from buttons or ReMode.
Describes how the APC 2 recognizes socket types via coding jumpers.
Details how instruments are identified based on resistance or electronic memory.
Specifies that only trained Erbe personnel can perform adjustments and tests.
Outlines the required temperature conditions for measurement and adjustment.
Lists the recommended testing and measuring equipment for servicing the APC 2.
Illustrates and describes the test setup for adjusting the APC 2 unit.
Details the step-by-step procedure for adjusting the APC 2 unit.
Explains that error messages are displayed on the VIO unit with an "A" prefix.
Lists specific error codes (A/E) and their descriptions and recommended actions.
Continues the list of A/E errors, their causes, and corrective actions.
Further details error codes (A/E) for APC 2 and VEM 2, including actions.
Lists remaining A/E errors, their descriptions, and recommended actions for troubleshooting.
States that only trained Erbe personnel can perform service and maintenance.
Defines a technical safety check as a preventive measure for operational safety.
Specifies that safety checks are required after maintenance and annually.
Lists testing and measuring equipment for APC and FiAPC sockets.
Lists testing and measuring equipment for HF sockets on the APC 2.
Provides an overview and general safety for technical safety checks.
Crucial safety guidelines to follow during technical safety checks.
Outlines user manual checks and visual inspections required for the test specimen.
Details tests required by national standards, including leakage current.
Describes the test setup for performance tests.
Details the procedure for checking pushbuttons and acknowledgement tones.
Lists equipment and describes the test setup for pressure tests.
Details test steps for vacuum and overpressure detection.
Describes the test procedure for shutdown at specific output pressures.
Details bottle pressure detection tests for APC 2 with VIO D.
Details bottle pressure detection tests for APC 2 with VIO S.
Details equipment, setup, and procedure for leak testing at 5 bar.
Details equipment, setup, and procedure for testing the purge function.
Lists equipment for gas flow measurement tests.
Illustrates the test setup for gas flow measurement.
Details the procedure and expected results for gas flow measurement.
Details tests for instrument recognition on APC sockets via resistance/EEPROM.
Details tests for instrument recognition on FiAPC sockets via EEPROM.
Details tests for instrument recognition on multifunction sockets.
Details equipment and test setup for fingerswitch activation on APC sockets.
Provides the test procedure for fingerswitch activation on APC sockets.
Describes test setup for FORCED APC activation on APC/FiAPC sockets.
Details the test procedure for FORCED APC activation.
Lists equipment for fingerswitch activation tests on APC 2 + VIO S.
Describes test setup for CUT/COAG activation on APC sockets with VIO S.
Describes test setup for FORCED APC activation on APC/FiAPC sockets with VIO S.
Refers to tests described in other service manuals for HF socket performance.
Refers to tests described in other service manuals for monopolar/MF sockets.
Refers to tests described in other service manuals for bipolar sockets.
Lists spare circuit boards for the APC 2 unit.
Details socket modules available as spare parts.
Lists APC socket modules, including FiAPC.
Lists bipolar socket modules.
Lists the MO 3Pin-Bovie monopolar socket module.
Lists the MO 3Pin, 9/5 monopolar socket module.
Lists multifunction socket modules (MF 0, MF-2).
To Next Page
